SKD6, AISI H11, VIDA 1 ERS, CrMoV Mold Steel
STEELMAX Steel Story

 

SKD 6 강재는 열간 성형용 금형 (hot forming mold) 강재입니다.
표면 마무리로 높은 경면성과 함께 좋은 인성 (toughness)가 ,

필요한 대형 플라스틱 성형용 금형 강재로 사용됩니다.
SKD6 재질은 좋은 고온 강도와 인성, 연성(ductility) 이고

열처리에 의해 심경화능 (through-hardening)과
열처리시에도 좋은 치수 안정성 (dimension stability) 재질입니다.

QT 열처리시에는 상온에서 HRC 경도 약 48 minimum
항복강도 1380, 인장강도 1620 MPa 수준의 강도입니다.

또한 높은 고온 강도 성질로 600 ℃ 수준에서
항복강도 880, 인장강도 600 MPa 수준의 강도입니다.

높은 강재 품질을 목적으로 ERS (electroslag remelting) 으로도 생산하며
SKD6 재질은 AISI H11, VIDA 1 ESR — UDEAHOLM trademark 와 비교 가능합니다.

※ Through-Hardening (깊은 경화)
철강재의 표면과 중심부의 경도에 차이가 없도록 경화 깊이를 크게 하는 담금질 경화.
Quench hardening such that the depth of hardening is not less than distance
between the core and the surface of the ferrous product.

※ ESR (Electro Slag Remelting : 일렉트로 슬래그 재용해)
After casting, the ingot is remelted from bottom to top by electric energy,
During this process, the melted steel falls through slags, which collects
almost all of the non-metallic inclusions
A new ingot solidifies from bottom to top and there is very little segregation
from case to core.
The fatigue resistance and in particular the toughness increase.
Even through ESR increases material costs, it can still be economical due to
the increase in the tool’s performance.
Metal injection moulds and extrusion dies often need ESR steel grades.

 

SKD 6, STD 6
Chemical composition (%) Carbon (C) 0.32~0.42
Silicon (Si) 0.80~1.20
Manganese (Mn) 0.50 max
Phosphorus (P) 0.030 max
Sulfur (S) 0.020 max
Chromium (Cr) 4.50~550
Molybdenum (Mo) 1.00~1.50
Vanadium (V) 0.30~0.50
Annealed (HBW) 229 max
QT Condition (HRC) 48 min

 

 

KS

SKD6, AISI H11, VIDA 1 ERS, CrMoV Hot Forming Mold Steel

 

스틸맥스는 연구소 수준의
깊이 있는 철강에 대한 이해를 바탕으로,

Carbon Steel, Special Steel, Stainless, Functional,
Ni-Alloy, Cu-, Al-, Co-, Ti-, Mg-, Metal, Forging.

Plate, Sections, H-Beam, Round, Angle, Channel,
Rail, Crane Rail, Flat, I-Beam, Pipe & Tube, SMLS.

ASTM, ASME, AISI, API, SAE, AMS, KS, JIS, CSA,
DIN-EN, NORSOK, DNV, ABS, GL, LR, KR, NK, RS.

국가규격, 국제단체 규격, 국제협회 규격부터
Mill Maker Standards까지 공급하고 있습니다.

Citius, Altius, Fortius,
더 빠르게, 더 높이, 더 강하게가 요구되는 올림픽처럼

공급이 어려운 철강재 공급에는
진정한 전문 선수를 필요로 합니다.