SM15C, S15C, Killed Steel, Structural Round-Bar
STEELMAX Steel Story

 

SM15C 는,KS D 3752 , S15C 는 JIS G 4051 규정의
기계구조용 탄소강 강재에 대한 규정으로, 내용은 같습니다.

Killed Steel (탈산강)으로 제조 되므로, SS400 과 화학 조성에서
비슷하다고 해도, Killed Steel 규정이 없는 SS400 과는 차이가 있습니다.

SM15C, S15C 강재는 탄소량 Nominal 0.15% 수준의 저탄소강으로
탄소량만으로 강재의 강도를 조정하는 전형적인 탄소강 강재 중 하나입니다.

SM15C, S15C 보다, 고급 강재인 SM15CK, S15CK 와 차이점은
Copper, Nickel, Chromium을 불순물로 보고, 더 엄격하게 제한하고 있습니다.

880~930 ℃ Air cooling, Normalizing (불림 열처리) 하면, 항복강도 235 MPa,
인장강도 270 MPa minimum 수준의 강도입니다.

※ Killed Steel (킬드강, 탈산강)
Steel sufficiently deoxidized with ferrosilicon, aluminium, and so on.
In the case of ingot casting, during the progress of solidification in a ingot mold,
it is gently solidified without generation of carbon monoxide,
being comparatively uniform, with little segregation and has no blow hole.
however, because of a shrinkage cavity is formed in the centre of upper part,
its yield is low, In the case of continuous casting, it is killed steel and,
comparing with an ingot casting, uniformity and yield better.
killed steel is further classified according to grain size or deoxidizer.

페로실리콘이나, 알루미늄 등으로 충분히 탈산한 강철로,
용탕이 응고 진행 중에 일산화 탄소를 발생 시키지 않고,
조용히 응고해, 비교적 균질하고, 편석이 적고, 기포도 없지만
응고된 강괴 윗부분 중심으로부터, 수축공이 생겨, 회수율이
좋지 못한 단점이 있고, 결정입도, 탈산제에 따라 세부적으로 더 분류됩니다.

※ 탄소강에서는 산소를 강철을 약하게 만드는 불순물로 보고
탈산제를 이용해 강(Steel) 내부의 산소를 제거함.

 

SM15C-KS, S15C-JIS
Chemical composition (%) Carbon (C) 0.13~0.18
Silicon (Si) 0.15~0.35
Manganese (Mn) 0.30~0.60
Phosphorus (P) 0.030 max
Sulfur (S) 0.030 max
Chromium (Cr) 0.30 max
Normalizing (reference only) Proof stress (MPa) 235 min
Tensile strength (MPa) 373 min
Elongation (%) 30 min
Hardness (HB) 111~167
Annealing (HB) 참고값 111~149

 

 

KS-JIS

SM15C, S15C, Killed Steel, Structural Round-Bar

 

스틸맥스는 연구소 수준의
깊이 있는 철강에 대한 이해를 바탕으로,

Carbon Steel, Special Steel, Stainless, Functional steel,
Ni-Alloy, Cu-Alloy, Al-Alloy, Ti-Alloy, Forging.

Plate, Sections, H-BEAM, Angle, Channel,
Flat, Round Bar, Rail, Pipe & Tube, SMLS,

ASTM, ASME, AISI-AMS, ANSI, API, SAE, AS, CSA
DIN-EN , KS, JIS, DNV, ABS, GL, LR, KR, NK. RINA, RS, CCA, IACS의

국가규격, 국제단체 규격, 국제협회 규격부터
Mill Maker Standards까지 공급하고 있습니다.

Citius, Altius, Fortius,
더 빠르게, 더 높이, 더 강하게가 요구되는올림픽처럼

공급이 어려운 철강재 공급에는
진정한 전문 선수를 필요로 합니다.

 구매, 문의, 견적, 안내가 필요하신 경우
Contact us 바로가기 : https://steelmax.co.kr/contact/