S960QL, 1.8933 High Yield Strength, Quenching Tempering
STEELMAX Steel Story

 

S960QL, + QT Steel 은, DIN-EN 10025-6 규정에 있는
고항복점 (High Yield Strength) 강판입니다.

SM570 은 KS의 D3515, JIS의 3106 에 규정된
용접 구조용강 중, 최고 항복 강도 강재입니다.

POSTEN 80 은, POSCO Trademark 로 공급되는
POSCO 공급 강재 중 최고 수준의 고항복점 강재입니다.

모두 높은 강도를 가지는 강재이지만
S960QL Quenching and Tempering 강재가 최고의 항복강도 입니다.

물론 다른 Alloy Steel 에서는, S960QL + QT Steel 보다
높은 항복강도를 가지는 강재는 있지만

두꺼운 후판 (Thick plate : 3≤t≤50) 로는
S960QL, QT Steel 이, 최고 수준의 항복강도 강재입니다.

Chromium (크롬), Nickel (니켈), Molybdenum (몰리브덴)을 합금 해서
JIS의 SNCM 415 강재 (Ni-Cr-Mo 합금강재)

ASTM, AISI 8620 강재 (Ni-Cr-Mo 합금강재)
보다도 합금량이 높습니다.

Chromium (크롬), Nickel (니켈), Molybdenum (몰리브덴)
3가지 원소는 하나같이, Quenching 효과 향상 원소입니다.

 

Steel Grade S960QL
Steel Number 1.8933
Strength Yield(㎫) 960 min. 3≤t≤50
Tensile(㎫) 980~1150. 3≤t≤50
Elongation(%) 10 min
CVN Impact Test Longitudinal 0℃ 50
-20℃ 40
-40℃ 30
CVN Impact Test Transverse 0℃ 35
-20℃ 30
-40℃ 27
Chemical Composition(%) Carbon (C) 0.20 max
Silicon (Si) 0.80 max
Manganese (Mn) 1.70 max
Phosphorus (P) 0.020 max
Sulfur (S) 0.010 max
Nickel (Ni) 2.0 max
Chromium (Cr) 1.50 max
Molybdenum (Mo) 0.70 max
Vanadium (V) 0.12 max
Titanium (Ti) 0.05 max
Copper (Cu) 0.50 max
Zirconium (Zr) 0.15 max
Niobium (Nb) 0.06 max
Boron (B) 0.0050 max
Nitrogen (N) 0.015 max

 

※ Quenching (담금질)
Operation which consists of cooling a ferrous products
more rapidly then in still air.
The use of a term specifying the cooling condition is recommended,
for example air-blast quenching, water  quenching, step quenching, etc.

철강재를 공기 중에 두는 것보다 더 빠르게 냉각하는 작업으로
퀜칭이란 용어를 사용하며, 공냉 (송풍 퀜칭), 수냉, 단계 퀜칭처럼
냉각 조건을 붙여 사용하는 것이 바람직합니다.

※ Tempering (뜨임 열처리)
Heat treatment applied to a ferrous product, generally after quench hardening,
or another heat treatment  to bring the properties to the required level, and
consisting of heating to specific temperature (<Ac1 )and soaking one or
more time, followed by cooling at an appropriate rate.
Tempering generally leads to a reduction in hardness
but can, in certain cases, cause an increase in hardness.

철강재를 퀜칭 경화 후, 또는 특정 수준의 성질을 얻기 위하여 (<Ac1 ) 온도
이하의 특정 온도로 가열한 후 한두 번 균열화한 다음, 적당한 속도로
냉각하는 별도의 열처리로
보통 템퍼링은 경도를 감소 시키지만, 어떤 경우에는 도리어
경도가 증가할 수도 있습니다.

 

11

S960QL, QT Steel, Posten 80 Comparison

 

스틸맥스는 연구소 수준의
깊이 있는 철강에 대한 이해를 바탕으로,

Carbon Steel, Special Steel, Stainless, Functional steel,
Ni-Alloy, Cu-Alloy, Al-Alloy, Ti-Alloy, Forging .

Plate, Sections, H-BEAM, Angle, Channel,
Flat, Round Bar, Rail, Pipe & Tube, SMLS,

ASTM, ASME, AISI-AMS, ANSI, API, SAE, AS, CSA
DIN-EN , KS, JIS, DNV, ABS, GL, LR, KR, NK. RINA, RS, CCA, IACS의

국가규격, 국제단체 규격, 국제협회 규격부터
Mill Maker Standards까지 공급하고 있습니다.

Citius, Altius, Fortius,
더 빠르게, 더 높이, 더 강하게가 요구되는올림픽처럼

공급이 어려운 철강재 공급에는
진정한 전문 선수를 필요로 합니다.

철강재의 기본 물성치를 바로 확인해 볼 수 있는
스틸맥스(주) 사이트 철강 강종 “500” 바로가기 : https://steelmax.co.kr/products/plate/

자주 사용하는 대표적인 철강재의 중량과 금액을 자동으로 계산해 주는
철강 중량금액 자동계산기 바로가기 : https://steelmax.co.kr/calculator/carbon/plate/

 구매, 문의, 견적, 안내가 필요하신 경우
Contact us 바로가기 : https://steelmax.co.kr/contact/