Alloy 410S, S41008, A240-410S, Ferritic
STEELMAX Steel Story

 

Alloy 410S, A240-410S 는 페라이트계 스테인레스로
Type 410 스텐에서, 탄소를 감소시킨 강종입니다.

탄소를 감소시켜, 강도와 경도를 떨어뜨리면서,
연신율과 내식성, 가공성을 향상 시킨 재질입니다.

Alloy 410S 은 UNS S41008, 또는 ASTM A240-410S 입니다.
임계 온도 (critical temperature) 에서 급냉 (rapid cooling)을 해도

급냉 효과에 따른 강도가 높아지지 않는 재질입니다.
급냉을 해도 강도가 높아지지 않음으로 인해

용접과 고온 환경에서 크랙이 발생하지 않으며
연성(ductility) 성질을 가집니다.

Alloy 410S, A240-410S 스테인레스는 내식성과 내산화성
(oxidation resistance)에서는 Type 410 과, 비슷합니다.

Alloy 410S (S41008) 은, 석유 생산 시설의 heat exchangers, towers, 광산용
기계류, 열처리 공정 자재로 annealing box, quenching 랙 (racks)으로 사용합니다

※ Elongation (연신율 : 延伸率)
The extension of metal in length when it is pulled from both sides.
It is a common mechanical parameter for metallic materials, which
is expressed as percentage of the original length. It is determined
by the tensile test, Generally, an increase in elongation leads an
increase of ductility.

금속 재료의 기계적 성질을 나타내는 지표 중 하나로, 시험편을
양쪽에서 잡아당겨, 원래 표점거리간 길이와 늘어난 길이를
백분율로 표시하며, 연신율 증가는 연성의 증가로 봅니다.

※ Ductility (연성 : 延性)
The property of metals that enables them to be mechanically deformed
when cold, without fracture. In steel, ductility is usually measured by
elongation and reduction area is determined in a tensile test.

금속에 인장력을 줘 소성 변형을 일으켰을 때, 끊어짐이 없이 선 (line)상으로
늘릴 수 있는 성질을 연성이라고 하고, 연성은 인장 시험에서
연신율 (Elongation), 단면 수축율 (Reduction area; RA)로 측정합니다.
물질이 파괴되지 않고 유연하게 변할 수 있는 능력입니다.
쉽게 말해 물질이 파괴되지 않고 유연하게 변형할 수 있는 능력입니다.

※ Critical points (임계점)
Transformation temperature for a particular alloy
특정한 합금의 변태 온도

 

ASTM A240-410S Type 410S Type 410
S41008 S41000
Chemical composition(%) Carbon (C) 0.08 max 0.08~0.15
Manganese (Mn) 1.00 max 1.00 max
Phosphorus (P) 0.040 max 0.040 max
Sulfur (S) 0.030 max 0.030 max
Silicon (Si) 1.00 max 1.00 max
Chromium (Cr) 11.5~13.5 11.5~13.5
Nickel (Ni) 0.60 max 0.75 max
Tensile strength (MPa, min) 415 450
Yield strength (MPa, min) 205 205
Elongation (%, min) 22 20
Hardness Brinell HBW 183 max 217 max
Rockwell B 89 max 96 max

 

 

Alloy 410S, S41008, A240-410S, Ferritic

 

스틸맥스는 연구소 수준의
깊이 있는 철강에 대한 이해를 바탕으로,

Carbon Steel, Special Steel, Stainless, Functional,
Ni-Alloy, Cu-, Al-, Co-, Ti-, Mg-, Metal, Forging.

Plate, Sections, H-Beam, Round, Angle, Channel,
Rail, Crane Rail, Flat, I-Beam, Pipe & Tube, SMLS.

ASTM, ASME, AISI, API, SAE, AMS, KS, JIS, CSA,
DIN-EN, NORSOK, DNV, ABS, GL, LR, KR, NK, RS.

국가규격, 국제단체 규격, 국제협회 규격부터
Mill Maker Standards까지 공급하고 있습니다.

Citius, Altius, Fortius,
더 빠르게, 더 높이, 더 강하게가 요구되는 올림픽처럼

공급이 어려운 철강재 공급에는
진정한 전문 선수를 필요로 합니다.