SC480 Pipe, Centrifugal Steel Casting, SMLS
STEELMAX Steel Story

 

SC480 은 탄소강 주강품 규격입니다.
SC480 은 Steel Casting, 인장강도 480 MPa 를

의미하는 탄소강 주강품의 Steel Symbol 입니다.
일반 구조용 탄소강재 이전 KS SS400,

개정된 KS SS275 보다
인장강도 하한 값 보다, 인장강도가 20% 높습니다.

원심 주조 (centrifugal casting) 강관으로 제조 되며
다른 형상의 주조품으로도 생산됩니다.

합금 원소가 없는 단순 탄소강으로
탄소량만으로 강도를 조정하며

불순물인 황 (sulfur), 인 (phosphorus)의
제한 값도 그리 높지 않은, 일반적인 제한만 하고 있습니다.

원심력 주강품 강관으로 제조되는 SMLS 제품의
강재 기호는 SC480-CF로 표기됩니다.

 

JIS G5101, Carbon steel casting
Class SC480 SC450 SC410 SC360
Chemical composition (%) Carbon (C) 0.40 max 0.35 max 0.30 max 0.20 max
Phosphorus (P) 0.040 max 0.040 max 0.040 max 0.040 max
Sulfur (S) 0.040 max 0.040 max 0.040 max 0.040 max
Tensile strength (MPa, min) 245 225 205 175
Yield strength (MPa, min) 480 450 410 360
Elongation (%, min) 17 19 21 23
Reduction of area (%, min) 25 30 35 35

 

※ Steel castings (주강품 : 鑄鋼品)
Steels cast into mold to obtain the desired shape.
For mold, there are sand mold, metal mold, fire brick, black lead and so on.

강철을 주형에 주입해 소요 제품의 모양으로 만든 것으로
사형 (沙型), 금속 주형, 적벽돌 주형, 흑연 주형등이 있습니다.

※ Centrifugal steel castings(원심력 주강품 : 遠心鑄鋼品)
Steel castings manufactured by centrifugal casting
For the rotating shaft, vertical and horizontal type, and
for mold, there metal mold and sand mold.

​원심력 주조법으로 제조 된 주강품.
회전의 축 방향에 따라서 직립형과 수평형이 있으며
주형으로는 금형과 사형 (沙型)이 있습니다.

※ Carbon Steel (炭素鋼 : 탄소강)
Steel made by alloy iron and carbon of which carbon content
is generally within a range from 0.02% to 2%.
Further, a small amount of silicon, manganese, phosphorus,
sulfur, etc. are usually contained.
For convenience, carbon steel may be sometimes classified as
according to the carbon content or hardness (including strength).
Classification by carbon content : Low carbon steels,
medium carbon steels and high carbon steels.
Classification by hardness : Extra mild steel,
mild steel and hard steel.

철과 탄소의 합금으로 탄소 함유량이 보통 0.02~약 2% 범위의 강
또한 소량의 규소, 망간, 인, 유황 등을 함유하는 것이 보통입니다.
편의상, 탄소 함유량 또는 경도(강도도 포함)에 따라서 탄소강은
다시 다음과 같이 분류됩니다.
탄소 함유량에 따라 분류하는 경우 : 저탄소강, 중탄소강, 고탄소강
경도에 따른 분류 : 극연강, 연강, 경강.

 

JIS

SC480 Pipe, Centrifugal Steel Casting, SMLS

 

스틸맥스는 연구소 수준의
깊이 있는 철강에 대한 이해를 바탕으로,

Carbon Steel, Special Steel, Stainless, Functional,
Ni-Alloy, Cu-, Al-, Co-, Ti-, Mg-, Metal, Forging.

Plate, Sections, H-Beam, Round, Angle, Channel,
Rail, Crane Rail, Flat, I-Beam, Pipe & Tube, SMLS.

ASTM, ASME, AISI, API, SAE, AMS, KS, JIS, CSA,
DIN-EN, NORSOK, DNV, ABS, GL, LR, KR, NK, RS.

국가규격, 국제단체 규격, 국제협회 규격부터
Mill Maker Standards까지 공급하고 있습니다.

Citius, Altius, Fortius,
더 빠르게, 더 높이, 더 강하게가 요구되는 올림픽처럼

공급이 어려운 철강재 공급에는
진정한 전문 선수를 필요로 합니다.