AISI P20, Low-Carbon Mold Tool Steel
STEELMAX Steel Story

 

AISI P20 강재는 저탄소 금형강으로 제조사로부터 Prehardened
열처리 되어 공급되, 추가적인 열처리기 필요 없습니다.

Chromium-Molybdenum 합금 공구강으로,
프라스틱 금형강 또는 아연 die casting 용도로 사용됩니다.

Fully QT 열처리 되는 경우 Brinell 약 300 수준,
Usual working hardness HRC 30~36 수준입니다.

P20 은 좋은 기계 가공성, polishing 과 좋은 인성 (toughness)
높은 decarburization, resistance to cracking 특징입니다.

AISI 공구강으로 AISI P20 에서, “P”는 Low-carbon tool steel Group — Plastic 금형강용
AISI A2, AISI A6 — Air-hardening medium-alloy, cold work steels Group,

AISI O1, AISI O6 — Oil-hardening cold work steels
AISI H11, AISI H13 — Chromium hot-work steels

AISI S5, AISI S7 — Shock resisting steels
AISI L6 — Low-alloy special-purpose steels

AISI M2, AISI M3, AISI M3 — Molybdenum high-speed steel
공구강 AISI 약호는 강재의 대표적인 특성을 나타내고 있습니다.

※ Decarburization (탈탄)
Removal of carbon from the outer surface of iron or steel,
usually by heating in an oxidizing or reducing atmosphere.
Water vapor, oxygen and carbon dioxide are strong decarburizers.
Reheating with adhering scale is also strongly decarburizing in action.
철강재 표면층에서 일어나는 탄소 농도 감소 현상을 말합니다.

※ Workability (가공성)
The degree of suitability for various working
required depending on the use
용도에 따른 각종 가공에 적합한지 어떤지의 정도

※ Tool steel (공구강, 工具鋼)
A generic term of steels used various jigs and tools the cutting and
plastic working for metal or nonmetal.
There are a large number of types, because they have many uses and
various required performance. They are, as a rule, classified into carbon
tool steels, alloy tool steels, and high speed tool steels by chemical
composition and performance.

금속, 또는 비금속의 절삭, 소성 가공용 등의 각종 지그 (jig), 공구로 쓰이는
강철의 총칭. 용도가 넓고 요구 성능이 다방면에 걸치므로 종류가 많습니다.
일반적으로는 화학 성분 및 성능을 고려하여 탄소 공구강, 합금 공구강,
고속도 공구강으로 분류됩니다.

 

AISI P20
Chemical composition (%) Carbon (C) 0.28~0.40
Manganese (Mn) 0.06~1.00
Silicon (Si) 0.20~0.80
Chromium (Cr) 1.40~2.00
Molybdenum (Mo) 0.30~0.55

 

 

AISI-SAE

AISI P20, Low-Carbon Mold Tool Steel

 

스틸맥스는 연구소 수준의
깊이 있는 철강에 대한 이해를 바탕으로,

Carbon Steel, Special Steel, Stainless, Functional,
Ni-Alloy, Cu-, Al-, Co-, Ti-, Mg-, Metal, Forging.

Plate, Sections, H-Beam, Round, Angle, Channel,
Rail, Crane Rail, Flat, I-Beam, Pipe & Tube, SMLS.

ASTM, ASME, AISI, API, SAE, AMS, KS, JIS, CSA,
DIN-EN, NORSOK, DNV, ABS, GL, LR, KR, NK, RS.

국가규격, 국제단체 규격, 국제협회 규격부터
Mill Maker Standards까지 공급하고 있습니다.

Citius, Altius, Fortius,
더 빠르게, 더 높이, 더 강하게가 요구되는 올림픽처럼

공급이 어려운 철강재 공급에는
진정한 전문 선수를 필요로 합니다.