SFL 2, JIS G3205 Forging Steel, Low Temperature
STEELMAX Steel Story

 

SFL 2 는, 저온용 단조강 규격입니다.
KS D4125, JIS G3205 규정으로

SFL 1, SFL 2, SFL 3, 3가지의 Grade가 있습니다.
SFL 2 는, 합금강은 아닙니다.

SFL2 는, 탄소강으로, 압력용기 및 그 부품에 사용하는
용접성을 고려한 탄소강 단조품입니다.

SFL 2 는, Normalizing or Normalizing and Tempering or
Quenching and Tempering 등의 적당한 열처리를 해야 합니다.

저온 충격 시험이 있으며, SFL 1 : -30℃
SFL 2 : -45℃, SFL 3 (3.5% Nickel 강) : -101℃ 에서 시험 조건입니다.

 

SFL2
Chemical composition (%, max) Carbon (C) 0.30
Silicon (Si) 0.25
Manganese (Mn) 1.35
Phosphorus (P) 0.030
Sulfur (S) 0.030
Yield point (MPa, min) 245
Tensile strength (MPa, min) 490~640
Elongation (%, min) 19
Reduction of area (%, min) 30
Test temperature (℃) -45

 

※ Steels for low temperature service (저온용강재, 低溫用鋼材)
Steel products manufactured for the pressure vessels and structures
used at a low temperature which required toughness at a low
temperature and weldability.
There are carbon steel, low alloy steel, 2.5% nickel steel, 3.5 nickel steel
9% nickel steel, austenitic stainless steel, etc. according to use temperature.

저온하에서 쓰이는 용기, 설비 및 구조재로서 저온 인성 및 용접성을 중시해서
제조 된 강재로, 사용 온도에 따라 탄소강, 저합금강, 2.5% 니켈강, 3.5% 니켈강
9% 니켈강, 오스테나이트 스텐레스강이 있습니다.

※ Carbon Steel (炭素鋼 : 탄소강)
Steel made by alloy iron and carbon of which carbon content
is generally within a range from 0.02% to 2%.
Further, a small amount of silicon, manganese, phosphorus,
sulfur, etc. are usually contained.
For convenience, carbon steel may be sometimes classified as
according to the carbon content or hardness (including strength).
Classification by carbon content : Low carbon steels,
medium carbon steels and high carbon steels.
Classification by hardness : Extra mild steel,
mild steel and hard steel

철과 탄소의 합금으로 탄소 함유량이 보통 0.02~약 2% 범위의 강
또한 소량의 규소, 망간, 인, 유황 등을 함유하는 것이 보통입니다.
편의상, 탄소 함유량 또는 경도(강도도 포함)에 따라서 탄소강은
다시 다음과 같이 분류됩니다.
탄소 함유량에 따라 분류하는 경우 : 저탄소강, 중탄소강, 고탄소강
경도에 따른 분류 : 극연강, 연강, 경강.

 

Forging

SFL 2, JIS G3205 Forging Steel, Low Temp.

 

스틸맥스는 연구소 수준의
깊이 있는 철강에 대한 이해를 바탕으로,

Carbon Steel, Special Steel, Stainless, Functional,
Ni-Alloy, Cu-, Al-, Co-, Ti-, Mg-, Metal, Forging.

Plate, Sections, H-Beam, Round, Angle, Channel,
Rail, Crane Rail, Flat, I-Beam, Pipe & Tube, SMLS.

ASTM, ASME, AISI, API, SAE, AMS, KS, JIS, CSA,
DIN-EN, NORSOK, DNV, ABS, GL, LR, KR, NK, RS.

국가규격, 국제단체 규격, 국제협회 규격부터
Mill Maker Standards까지 공급하고 있습니다.

Citius, Altius, Fortius,
더 빠르게, 더 높이, 더 강하게가 요구되는 올림픽처럼

공급이 어려운 철강재 공급에는
진정한 전문 선수를 필요로 합니다.