AMS 4027 Plate, ASTM B209, 6061 T6, Aluminum
STEELMAX Metal Story

 

AMS 4027 은, 열처리 가능한 Al-Mg-Si 알루미늄 합금으로
Plate, Sheet 제품으로 한정된, 6061 Temper T6 재질입니다.

6061 재질은 알루미늄 재질로 보면, 중간 수준의 강도와
내식성, 용접성, 냉간 가공성이 좋은 금속입니다.

AMS 4027 은, furniture, structural applications, 그리고, 압출
성형 되는 대부분의 알루미늄 재료중 가장 많이 사용됩니다.

※ Aluminium Temper T6 meaning
Solution heat-treated, and then artificial age hardened
Applies to products which are not cold works after solution
heat treatment, and then artificially age hardened.
Therefore, the effect of cold work in flattening or
straightening may be small.

고용화 열처리 이후에 인공 시효 경화 한 후 안정화된 상태를 말하고
고용화 열처리 이후에 냉간 가공을 실시하지 않으며 변형을 바로잡기 위한
냉간 가공은 기계적 성질에 영향이 작은 수준을 말합니다.

※ Cold working (냉간 가공)
Plastic deformation of a metal or alloy at a temperature
such that strain hardening occurs.
가공 경화가 발생하는 온도에서의 금속 또는 합금의 소성 변형을 말합니다.

※ Solution heat treatment (용체화 처리/고용화 처리)
A process in which an alloy is heated to a suitable temperature and is held
at this temperature long enough to allow soluble constituents to enter into
solid solution where they are retained in a super-saturated state after quenching.

합금을 적절한 온도로 가열하고 급랭 이후 과포화 상태로 존재하던
가용 성분이 고용체에 고용화 될 수 있도록 충분히 유지하는 공정을 말합니다.

※ AMS 4027 : Aluminum Alloy, Sheet and Plate, 1.0Mg-0.60Si
-0.28Cu-0.20Cr (6061-T6 sheet, -T651 Plate), Solution and
Precipitation Heat Treated.

※ ASTM B209 : Standard Specification for Aluminum and
Aluminum-Alloy Sheet and Plate (Metric)

 

Aluminum

AMS 4027, ASTM B209, 6061 T6, Aluminum

 

스틸맥스는 연구소 수준의
깊이 있는 철강에 대한 이해를 바탕으로,

Carbon Steel, Special Steel, Stainless, Functional,
Ni-Alloy, Cu-, Al-, Co-, Ti-, Mg-, Metal, Forging.

Plate, Sections, H-Beam, Round, Angle, Channel,
Rail, Crane Rail, Flat, I-Beam, Pipe & Tube, SMLS.

ASTM, ASME, AISI, API, SAE, AMS, KS, JIS, CSA,
DIN-EN, NORSOK, DNV, ABS, GL, LR, KR, NK, RS.

국가규격, 국제단체 규격, 국제협회 규격부터
Mill Maker Standards까지 공급하고 있습니다.

Citius, Altius, Fortius,
더 빠르게, 더 높이, 더 강하게가 요구되는 올림픽처럼

공급이 어려운 철강재 공급에는
진정한 전문 선수를 필요로 합니다.