C5212 Sheet, Plate, Strip, Coil, Phosphor Bronze
STEELMAX Metal Story

 

C5212 재질은 인청동 (phosphorus bronze)입니다.
인청동이라고 해서 인 (P)가, 많이 합금 되지도 않고, 0.05~0.5% 수준입니다.

적은 인(P) 합금 만으로도 내마모성, 탄성, 경도, 강도가 좋아지며
냉간 가공 과정을 거치면, 탄성이 더욱 높아집니다.

C5212 는, 자성이 없고, 내식성이 좋으며, 용접성도 좋은 금속으로
내피로성 (fatigue resistance) 전연성까지 좋아, 얇은 박판, Sheet, Coil 형태입니다.

C5212 재질은 C5191 재질과 함께 수축성이 풍부한 용수철 재료로 사용되며
connector, bellows, fuse clip, bearing, electronic, sliding piece 용도입니다.

※ Temper (질별 : 質別)
금속 또는 합금에 요구되는 특정한 물리적 및/또는 기계적 성질을
부여하는 공정으로 (예를 들어 기계적 처리 및/또는 열처리) 후의
제품의 상태를 말합니다.

The state of material after the necessary treatment is processed for
the purpose of giving the particular physical or mechanical property
to wrought products and alloy products.

※ 강대 (Steel strip in coil, steel sheet in coil, steel plate in coil)
Hot rolled or cold rolled flat steel products which are coiled up.
평평하게 열간 압연 또는 냉간 압연 된 강철로 코일상으로 감긴 강재.

※ 전연성 (展延性 : punch stretch-ability : stretch formability)
Capability of material to be formed into defined form and dimensions
by expanding and bulging a part of plane sheet or formed products.

평판 또는 이미 성형 된 제품의 일부를 늘리든가 (부풀게 하든가) 튀어
나오게 하여 소정의 형상 치수로 성형할 수 있는 정도를 말합니다.

※ Ductility (연성 : 延性)
The property of metals that enables them to be mechanically deformed
when cold, without fracture. In steel, ductility is usually measured by
elongation and reduction area is determined in a tensile test.

금속에 인장력을 줘 소성 변형을 일으켰을 때, 끊어짐이 없이 선 (line)상으로
늘릴 수 있는 성질을 연성이라고 하고, 연성은 인장시험에서
연신율 (Elongation), 단면 수축율 (Reduction area; RA)로 측정합니다.
물질이 파괴되지 않고 유연하게 변할 수 있는 능력입니다.
쉽게 말해 물질이 파괴되지 않고 유연하게 변형할 수 있는 능력입니다.

 

C5212 Plate, Strip
Chemical composition (%) Cu+Sn+P 99.5 min
Lead (Pb) 0.02 max
Iron (Fe) 0.10 max
Tin (Sn) 7.0~9.0
Zinc (Zn) 0.20 max
Phosphorus (P) 0.03~0.35

 

 

C5212 Plate, Strip
Chemical composition (%) Cu+Sn+P 99.5 min
Lead (Pb) 0.02 max
Iron (Fe) 0.10 max
Tin (Sn) 7.0~9.0
Zinc (Zn) 0.20 max
Phosphorus (P) 0.03~0.35

 

 

Copper

C5212 Sheet, Plate, Strip, Coil, Phosphor Bronze

 

스틸맥스는 연구소 수준의
깊이 있는 철강에 대한 이해를 바탕으로,

Carbon Steel, Special Steel, Stainless, Functional,
Ni-Alloy, Cu-, Al-, Co-, Ti-, Mg-, Metal, Forging.

Plate, Sections, H-Beam, Round, Angle, Channel,
Rail, Crane Rail, Flat, I-Beam, Pipe & Tube, SMLS.

ASTM, ASME, AISI, API, SAE, AMS, KS, JIS, CSA,
DIN-EN, NORSOK, DNV, ABS, GL, LR, KR, NK, RS.

국가규격, 국제단체 규격, 국제협회 규격부터
Mill Maker Standards까지 공급하고 있습니다.

Citius, Altius, Fortius,
더 빠르게, 더 높이, 더 강하게가 요구되는 올림픽처럼

공급이 어려운 철강재 공급에는
진정한 전문 선수를 필요로 합니다.