Mo-Re, Molybdenum Rhenium Alloy, Refractory
STEELMAX Metal Story

 

Molybdenum (Mo, 몰리브덴), Rhenium (Re : 레늄) 원소는
고용융점 금속(refractory metal) 입니다.

Molybdenum 은 용융점 2610℃, 비중 10.22 g/㎤,
Rhenium melting point 3180℃, 비중 21.05 g/㎤ 입니다….철 (Iron 7.87)

Mo, Re 각각 pure metal 자체로 제품으로 제조해 사용하기도 하지만
Mo-Re 합금으로, 기계적 성질 향상과 물리적 성질을 이용하기도 합니다.

Molybdenum, Rhenium 모두 고융점 금속이면서
전연성 (전성과 연성)이 좋아, 압연 제품으로 제조가 가능합니다.

몰리브덴, 레늄, 텅스텐은 용융점이 높고, 강도, 내식성
전기 비저항이 커, 용도에서 비슷한 용도로 사용됩니다.

Mo-Re 합금으로는 Rhenium 47.5% 합금인 Mo47.5%Re 합금과
Mo41%Re 등의 합금이, 고온 강도와 물리적, 기계적 성질이 필요한 곳인

furnace, nuclear and aerospace critical applications, electronic and
semiconductors, medical device 용도의 foil, sheet, bar, tubing, wire 형태입니다.

※ Ductility (연성 : 延性)
The property of metals that enables them to be mechanically deformed
when cold, without fracture. In steel, ductility is usually measured by
elongation and reduction area is determined in a tensile test.

금속에 인장력을 줘 소성 변형을 일으켰을 때, 끊어짐이 없이 선 (line)상으로
늘릴 수 있는 성질을 연성이라고 하고, 연성은 인장시험에서
연신율 (Elongation), 단면 수축율 (Reduction area; RA)로 측정합니다.
물질이 파괴되지 않고 유연하게 변할 수 있는 능력입니다.
쉽게 말해 물질이 파괴되지 않고 유연하게 변형할 수 있는 능력입니다.

※ 전연성 (展延性 : punch stretch-ability : stretch formability)
Capability of material to be formed into defined form and dimensions
by expanding and bulging a part of plane sheet or formed products.

평판 또는 이미 성형 된 제품의 일부를 늘리든가 (부풀게 하든가) 튀어
나오게 하여 소정의 형상치수로 성형할 수 있는 정도를 말합니다.

※ Poisson’s ratio (포아송비)
Poisson’s ratio is the ratio of transverse contraction to strain to longitudinal
extension strain in the direction of stretching force.

재료의 비례적 한계 내에서 축 변형으로부터 나오는 횡단 변형과 축 변형의 비율.
재료를 인장 하면 (당기면) 축 방향 (길이 방향)의 늘어난 길이는
재료의 직경 (가로 방향)의 수축이 따릅니다.

※ 포아송비 (poisson’s ratio)의 수식은
Poisson’s ratio = 직경 (가로 방향)의 변형률 (수축율)/세로 방향의 변형율 (신장율)
콘크리트는 0.1, 일반적인 강재는 0.25~0.35, 고무 0.50 수준입니다.

 

Mo-47.5Re typical
Molybdenum (Mo) 52.50%
Rhenium (Re) 47.50%
Tensile strength 20℃ 1180 MPa
yield strength 20℃ 845 MPa
Elongation 22%
Modulus of Elasticity 365 GPa
poisson’s  Ratio 0.285
Shear Modulus 132 GPa
Melting point 2450 ℃
Max. service temperature 725 ℃
Rhenium Alloy®

 

Pure Metal alloy

Mo-Re, Molybdenum Rhenium Alloy, Refractory

 

스틸맥스는 연구소 수준의
깊이 있는 철강에 대한 이해를 바탕으로,

Carbon Steel, Special Steel, Stainless, Functional,
Ni-Alloy, Cu-, Al-, Co-, Ti-, Mg-, Metal, Forging.

Plate, Sections, H-Beam, Round, Angle, Channel,
Rail, Crane Rail, Flat, I-Beam, Pipe & Tube, SMLS.

ASTM, ASME, AISI, API, SAE, AMS, KS, JIS, CSA,
DIN-EN, NORSOK, DNV, ABS, GL, LR, KR, NK, RS.

국가규격, 국제단체 규격, 국제협회 규격부터
Mill Maker Standards까지 공급하고 있습니다.

Citius, Altius, Fortius,
더 빠르게, 더 높이, 더 강하게가 요구되는 올림픽처럼

공급이 어려운 철강재 공급에는
진정한 전문 선수를 필요로 합니다.