N07722, Alloy 722, ATI W-722™, AMS 5541, Ni-Alloy
STEELMAX Metal Story

 

Alloy 722 은 내식성, 내열성인 니켈 합금 재질입니다.
AMS 5541 은 Alloy 722 Plate, Sheet, AMS 5714 Bars, Forgings 규격 입니다.

Precipitation-Hardenable (석출 경화) 열처리 가능한 재질입니다.
극히 높은 고온 환경에서 내식성을 가지며, 여러가지 산 (acids)에 내식성입니다.

Alloy 722 은, 고온 내산화성(oxidation resistance)에 대한 저항성으로
gas turbine 과 turbine frame 부품으로 사용됩니다.

※ Precipitation Hardening Steels (석출 경화 : 析出硬化)
Steels with the property of being hardened by a method wherein
a small amount of elements such as aluminium, copper, etc.
is added and compounds of those elements or the like are
precipitated by heat treatment

알루미늄, 구리 등의 원소를 소량 첨가하고, 열처리에 의해
이들 원소 화합물을 석출 시켜 경화 하는 성질을 지니게 한 강.

※ Precipitation (석출 : 析出)
A phenomenon in which a crystal of a different phase is
separated from a solid solution and grows.

※ Oxidation resistance (내산화성 : 耐酸化性)
A property of oxidation resistance at a high temperature.
고온에서 산화 (철의 부식)에 견디는 성질

※ Heat resisting steels (내열강)
Alloy steels which retain oxidation resistance, high temperature
corrosion resistance or high temperature strength under
various circumstances at high temperature.
They often contain nickel, cobalt, tungsten and/or other alloy
elements other then several % min of chromium.

Principally, they are classified into four types, which are
martensitic, ferritic, austenitic and precipitation hardening,
according to their structure.

Further, when total amount of alloy elements exceed about
50%, they are generally, called super alloy, heat resisting
alloy or super heat resisting alloy.

내열강이란 고온에서의 각종 환경에서 내산화성,
내고온 부식성 또는 고온 강도를 유지하는 합금강으로
수% 이상의 크롬 외에 니켈, 코발트, 텅스텐 등
합금 원소를 함유하는 경우가 많으며 내열강은 그 금속의
조직에 따라 마르텐사이트계, 페라이트계
오스테나이트계, 석출경화계, 4가지로 분류됩니다.
또한 합금 원소의 총량이 50%를 넘는 경우는 초내열 합금, 또는 내열 합금,
또는 간단히 초합금이라고 부릅니다.

※ AMS 5541 : Nickel Alloy, Corrosion and Heat Resistant, Sheet
and Strip 73Ni-15.5Cr-2.4Ti-0.7Al*7.0Fe Annealed

※ AMS 5714 : Alloy Bars, Forgings, and Rings, Corrosion and Heat Resistant,
73Ni-15.5Cr-2.5Ti-0.70Al-7.0Fe, Precipitation-Hardenable

 

ATI W-722™, N07722, density 8.32 g/㎤
Chemical composition (%) Nickel (Ni) 70.0 min
Chromium (Cr) 14.00~17.00
Iron (Fe) 5.00~9.00
Titanium (Ti) 2.20~2.75
Aluminum (Al) 0.50~0.90
Carbon (C) 0.08 max
Yield strength (MPa) 655 min
Tensile strength (MPa) 1000 min
Hardness (HRC) 23 max
Elongation (%) 15 min
W-722™ trademark of Allegheny Technologies Incorporated

 

 

N07722, Alloy 722, ATI W-722™, AMS 5541, 니켈합금

 

스틸맥스는 연구소 수준의
깊이 있는 철강에 대한 이해를 바탕으로,

Carbon Steel, Special Steel, Stainless, Functional,
Ni-Alloy, Cu-, Al-, Co-, Ti-, Mg-, Metal, Forging.

Plate, Sections, H-Beam, Round, Angle, Channel,
Rail, Crane Rail, Flat, I-Beam, Pipe & Tube, SMLS.

ASTM, ASME, AISI, API, SAE, AMS, KS, JIS, CSA,
DIN-EN, NORSOK, DNV, ABS, GL, LR, KR, NK, RS.

국가규격, 국제단체 규격, 국제협회 규격부터
Mill Maker Standards까지 공급하고 있습니다.

Citius, Altius, Fortius,
더 빠르게, 더 높이, 더 강하게가 요구되는 올림픽처럼

공급이 어려운 철강재 공급에는
진정한 전문 선수를 필요로 합니다.