AMS 5618 Bar, 440C, Vacuum Melting, Hardness 58 HRC
STEELMAX Steel Story

 

AMS 5618 은, Vacuum Melted 방법으로 생산하는 내식강재
17Cr-0.52Mo (스텐레스) Bar, Wire, 단조강재에 대한 규정입니다.

AMS 5618 Bar 는,  AISI 440C, A276 Type 440C 강재의 물성을
만족 시킬 수 있는 재질로, premium aircraft-quality 강재입니다.

Quenching and Tempering 가능한 마르텐자이트계 스텐레스로
QT 열처리에 의해 Hardness nominal 60 HRC 수준입니다.

항복강도 1900 MPa, 인장강도 1960 수준의 높은 강도로
스텐레스 재질 중 최고의 강도와 경도 구현이 가능한 강재입니다.

AMS 5618 재질은 AMS 5630, AMS 5880, QQ-S-763, UNS S44004,
ASTM A473, A484, A493 규정의 440C와 대응 가능합니다.

※ Vacuum Melting (진공 용해 : 眞空熔解)
Melting in a vacuum to prevent contamination from air, as well as to
remove gases already dissolved in the metal ; the solidification may
also be carried out on a vacuum or at low pressure.

진공이나 낮은 압력에서 금속을 용해하는 생산 방법으로 대기 속에
있는 산소, 불순물이 들어가지 않게 금속을 제조하는 방법으로, 의료용,
고급 금속, 특수강, 전자 산업용 금속 재료의 생산에 사용되는 방법입니다

※ Martensitic Stainless Steels
Stainless steels which can be hardened by increasing carbon contents
of ferritic stainless steel and heat treatment to martensitic structure
SUS410 is representative.

담금질함으로서 마르텐자이트 조직으로 되어, 경화시킬 수가 있는
스테인레스강으로 SUS410 — 13% 크롬강이 대표적입니다.

※ Martensite (마르텐자이트)
체심 정방체 (BCC) 구조를 가지는 준안정 고용체를 말합니다.
이것은 오스테나이트가 확산 기구가 아닌 방법으로 변태 되어 형성됩니다.

Metastable solid solution with a body-centred tetragonal crystal or a
body-centered cubic crystal having the same chemical composition
as that of the original austenite.
It is formed at a temperature of point Ms or lower by the transformation
of austenite without diffusional mechanism.
Martensite is sometimes produced by plastic deformation of austenite.

 

440C VM +QT, ASTM A276
Chemical composition (%) Carbon (C) 0.95~1.20
Manganese (Mn) 1.00 max
Phosphorus (P) 0.040 max
Sulfur (S) 0.030 max
Silicon (Si) 1.00 max
Chromium (Cr) 16.0~18.0
Molybdenum (Mo) 0.75 max
Hardness (HB), Annealed Hot finished 269 max
Cold finished 285 max
Hardness(HRC), QT air 58 min

 

 

AMS

AMS 5618, 440C Vacuum Melting, Hardness 58 HRC

 

스틸맥스는 연구소 수준의
깊이 있는 철강에 대한 이해를 바탕으로,

Carbon Steel, Special Steel, Stainless, Functional,
Ni-Alloy, Cu-, Al-, Co-, Ti-, Mg-, Metal, Forging.

Plate, Sections, H-Beam, Round, Angle, Channel,
Rail, Crane Rail, Flat, I-Beam, Pipe & Tube, SMLS.

ASTM, ASME, AISI, API, SAE, AMS, KS, JIS, CSA,
DIN-EN, NORSOK, DNV, ABS, GL, LR, KR, NK, RS.

국가규격, 국제단체 규격, 국제협회 규격부터
Mill Maker Standards까지 공급하고 있습니다.

Citius, Altius, Fortius,
더 빠르게, 더 높이, 더 강하게가 요구되는 올림픽처럼

공급이 어려운 철강재 공급에는
진정한 전문 선수를 필요로 합니다.