1.1186, C40E, Non-Alloy QT Steel, EN 10083-2
STEELMAX Steel Story

 

1.1186, C40E 강재는 탄소강 규격 입니다.
탄소량 nominal 0.40% 함량으로, 담금질 열처리에 의해

through-hardening (심경화능) 가능한 비합금 탄소강재입니다.
QT 열처리시, 항복강도 16<d≤40, 400 MPa minimum 강도입니다.

1.1186, C40E 강재는 열간 압연, 열간 단조와 같은 열간 가공 제조하며
다시 단조, 절삭, 가공, 열처리를 해서 사용하는 기계 구조용 강재입니다.

1.1186, C40E 강재는 JIS S40C 강재와 비교되며
Killed Steel 를 원재료로 사용해서 생산됩니다.

표면을 경화 시켜, 내마모성을 지닌, 표면경화강으로도 쓰며
Shafts, bolts and nuts, gears, aumomitive application 용도입니다.

※ Through-Hardening (깊은 경화)
철강재의 표면과 중심부의 경도에 차이가 없도록 경화 깊이를 크게 하는 담금질 경화.
Quench hardening such that the depth of hardening is not less than distance
between the core and the surface of the ferrous product.

※ Quenched and Tempered Steel (QT, 조질강 : 調質鋼)
Steel products quenched and tempered in other to obtain
the properties which high strength steels should have.

퀜칭 + 템퍼링 (담금질 + 뜨임) 열처리를 함으로서
고장력강으로서의 성질을 가지게 한 강재.

※ Killed Steel (킬드강, 탈산강)
Steel sufficiently deoxidized with ferrosilicon, aluminium, and so on.
In the case of ingot casting, during the progress of solidification in a ingot mold,
it is gently solidified without generation of carbon monoxide,
being comparatively uniform, with little segregation and has no blow hole.
however, because of a shrinkage cavity is formed in the centre of upper part,
its yield is low, In the case of continuous casting, it is killed steel and,
comparing with an ingot casting, uniformity and yield better.
killed steel is further classified according to grain size or deoxidizer.

페로실리콘이나, 알루미늄 등으로 충분히 탈산한 강철로,
용탕이 응고 진행 중에 일산화탄소를 발생 시키지 않고,
조용히 응고해, 비교적 균질하고, 편석이 적고, 기포도 없지만
응고된 강괴 윗부분 중심으로부터, 수축공이 생겨, 회수율이
좋지 못한 단점이 있고, 결정입도, 탈산제에 따라 세부적으로 더 분류됩니다.

 

1.1186, C40E
Chemical composition (%) Carbon (C) 0.37~0.44
Silicon (Si) 0.40 max
Manganese (Mn) 0.50~0.60
Phosphorus (P) 0.030 max
Sulfur (S) 0.035 max
Chromium (Cr) 0.40 max
Molybdenum (Mo) 0.10 max
Nickel (Ni) 0.40 max
Cr+Mo+Ni 0.63 max

 

 

+N (=Normalizing)
 Φ (D mm) d≤16 16<d≤100 100<D≤250
 Thickness t≤16 16<D≤100 100<D≤250
 0.2% Proof Stress 320 min. 290 min. 260 min.
 Tensile strength 580 min. 550 min. 530 min.
 Fracture elongation(%) 16 min. 17 min. 17 min.

 

 

+QT (= Quenching and Tempering)
 Φ (D mm) d≤16 16<d≤40 40<D≤100
 Thickness t≤8 8<D≤20 20<D≤60
 0.2% Proof Stress 460 min. 400 min. 350 min.
 Tensile strength 650~800 630~780 600~750
Elongation (%) 16 min. 18 min. 19 min.
Reduction of area (%) 35 min. 40 min. 45 min.
Impact energy (joule) 30 min. 30 min.

 

 

DIN-EN

1.1186, C40E, Non-Alloy QT Steel, EN 10083-2

 

스틸맥스는 연구소 수준의
깊이 있는 철강에 대한 이해를 바탕으로,

Carbon Steel, Special Steel, Stainless, Functional,
Ni-Alloy, Cu-, Al-, Co-, Ti-, Mg-, Metal, Forging.

Plate, Sections, H-Beam, Round, Angle, Channel,
Rail, Crane Rail, Flat, I-Beam, Pipe & Tube, SMLS.

ASTM, ASME, AISI, API, SAE, AMS, KS, JIS, CSA,
DIN-EN, NORSOK, DNV, ABS, GL, LR, KR, NK, RS.

국가규격, 국제단체 규격, 국제협회 규격부터
Mill Maker Standards까지 공급하고 있습니다.

Citius, Altius, Fortius,
더 빠르게, 더 높이, 더 강하게가 요구되는 올림픽처럼

공급이 어려운 철강재 공급에는
진정한 전문 선수를 필요로 합니다.