A1070P H14, Alloy 1070, Pure Aluminum 99.70%
STEELMAX Metal Story

 

A1070P Aluminum 재질은 JIS H 4000, Plates, Sheets and Strips
규정의 순 알루미늄 재질 중 99.70% minimum 알루미늄입니다.

A1070P 재질은 강도는 약하고, 질긴 성질로 절삭성은 나쁘지만
열 전도성, 전기 전도성과 내식성이 좋은 금속입니다.

반사판 (refraction plates), 조명 기구 (lighting fixtures),
장식품 (ornaments), 화학용 탱크, 전도체 (conductive materials) 용도입니다.

A1070P 재질은 주로 Temper H112, Temper 14 이며, 열처리에 의해
강도가 높아지지 않고, 가공 경화에 의해 강도가 높아지는 재질입니다

※ Temper
The term “temper” means the division of mechanical properties
individually formed by various processing and heat treatment
conditions in the manufacturing process.

금속 또는 합금에 요구되는 특정한 물리적 성질 또는 기계적 성질을
부여하는 공정 (예를 들면 기계적 처리 및 열처리) 후의 상태를 말합니다.

※ Temper H1
Strain Hardened Only :
Applies to products that are strain hardened to obtain the desired mechanical
properties without supplementary thermal treatment.
The number following this designation indicates the final degree of strain hardening

가공 경화만 한 것으로 소정의 기계적 성질을 얻기 위해 추가 열처리를 하지 않고
가공 경화만 한 것을 말합니다.
H1 기호 다음의 숫자는 최종 가공 경화 정도를 나타냅니다.

※ Strain hardening (가공 경화)
Modification of a metal structure by cold working, resulting in an increase in strength
and hardness, generally with some loss of ductility.

냉간 가공에 의한 금속 조직의 변화로 강도와 경도의 증가를 유발하며
일반적으로 연성이 감소되는 현상이 있습니다.

 

Alloy 1070, A1070P, JIS H 4000
Chemical composition (%) Silicon (Si) 0.20 max.
Iron (Fe) 0.25 max.
Copper (Cu) 0.04 max.
Manganese (Mn) 0.03 max.
Magnesium (Mg) 0.03 max.
Zinc (Zn) 0.04 max.
Vanadium (V) 0.05 max.
Titanium (Ti) 0.03 max.
Other each 0.03 max.
Other total
Aluminum (Al) 99.70 min.

 

 

A1070P H14, JIS H 4000, Mechanical properties
Thickness (mm) Tensile Strength (MPa) Proof Strength (MPa) Elongation (%)
0.2≤t≤0.3 85~120 1 min.
0.3<t≤0.5 2 min.
0.5<t≤0.8 3 min.
0.8<t≤1.3 65 min. 4 min.
1.3<t≤2.9 65 min. 5 min.
2.9<t≤12 65 min. 6 min.

 

 

Aluminum Alloy

A1070P H14, Alloy 1070, Pure Aluminum 99.70%, Plate, Sheet

 

스틸맥스는 연구소 수준의
깊이 있는 철강에 대한 이해를 바탕으로,

Carbon Steel, Special Steel, Stainless, Functional,
Ni-Alloy, Cu-, Al-, Co-, Ti-, Mg-, Metal, Forging.

Plate, Sections, H-Beam, Round, Angle, Channel,
Rail, Crane Rail, Flat, I-Beam, Pipe & Tube, SMLS.

ASTM, ASME, AISI, API, SAE, AMS, KS, JIS, CSA,
DIN-EN, NORSOK, DNV, ABS, GL, LR, KR, NK, RS.

국가규격, 국제단체 규격, 국제협회 규격부터
Mill Maker Standards까지 공급하고 있습니다.

Citius, Altius, Fortius,
더 빠르게, 더 높이, 더 강하게가 요구되는 올림픽처럼

공급이 어려운 철강재 공급에는
진정한 전문 선수를 필요로 합니다.