1.4153, X80CrVMo13-2, Martensitic Tool Steel
STEELMAX Steel Story

 

1.4153 재질 강재는, QT 열처리로 경화 시킬 수 있는 마르텐자이트계
스텐레스로, 주로 칼 (knife)을 제조하는데 사용되는 재질입니다.

1.4153 은, 260~300℃ 수준에서 Tempering 열처리시 경도 HRC 54~56 수준이고,
좋은 인성(toughness)과 스텐으로는 중간 수준의 내식성을 가지는 재질입니다.

1.4153 재질을 칼의 용도로 사용하는 이유는, 칼날을 날카로움을 유지하는
성질이 있어서이고, 음식산업 용도의 칼날 제조에 사용됩니다.

1.4153 스텐은 420 ℃ 수준을 넘는 온도에서 Tempering 시에는
결정 입계에 카바이트 석출에 의한 공식이 발생할 수 있으니, 주의가 필요합니다.

일반적인 공급 제품은 255 HB 수준의 경도이고, 비중 7.6 g/㎤,
열전도율 16.0 W/m·K, 열팽창계수 10.5 10-6/K at 20~100℃ 입니다.

※ Martensitic Stainless Steels
Stainless steels which can be hardened by increasing carbon contents
of ferritic stainless steel and heat treatment to martensitic structure
SUS410 is representative.
담금질함으로서 마르텐자이트 조직으로 되어, 경화 시킬 수가 있는
스테인레스강으로 SUS410 — 13% 크롬강이 대표적입니다.

※ Toughness (인성 : 靭性)
The degree of difficulty in occurring impact breaking
because of the material’s toughness .
질기고 세며, 충격  파괴를 일으키기 어려운지, 어떤지의 정도.

※ Tempering (뜨임 열처리)
Heat treatment applied to a ferrous product, generally after quench hardening,
or another heat treatment to bring the properties to the required level, and
consisting of heating to specific temperature (<Ac1 )and soaking one or
more time, followed by cooling at an appropriate rate.
Tempering generally leads to a reduction in hardness
but can, in certain cases, cause an increase in hardness.

철강재를 퀜칭 경화 후, 또는 특정 수준의 성질을 얻기 위하여 (<Ac1 ) 온도
이하의 특정 온도로 가열한 후 한두 번 균열화한 다음, 적당한 속도로
냉각하는 별도의 열처리로, 보통 템퍼링은 경도를 감소 시키지만,
어떤 경우에는 도리어 경도가 증가할 수도 있습니다.

※ Grain boundary (결정 입계 : 結晶粒界)
Interface separating two grains with different crystallographic orientations.
서로 다른 방위를 가진 두 결정 사이의 경계면

 

X80CrVMo13-2, 1.4153
Chemical composition (%) Carbon (C) 0.75~0.85
Silicon (Si) 0.15~0.35
Manganese (Mn) 0.30~0.50
Chromium (Cr) 12.50~13.50
Molybdenum (Mo) 0.40~0.60
Vanadium (V) 1.65~1.85

 

 

DIN-EN

1.4153, X80CrVMo13-2, Martensitic Tool Steel

 

스틸맥스는 연구소 수준의
깊이 있는 철강에 대한 이해를 바탕으로,

Carbon Steel, Special Steel, Stainless, Functional steel,
Ni-Alloy, Cu-Alloy, Al-Alloy, Ti-Alloy, Forging.

Plate, Sections, H-BEAM, Angle, Channel,
Flat, Round Bar, Rail, Pipe & Tube, SMLS,

ASTM, ASME, AISI-AMS, ANSI, API, SAE, AS, CSA
DIN-EN , KS, JIS, DNV, ABS, GL, LR, KR, NK. RINA, RS, CCA, IACS의

국가규격, 국제단체 규격, 국제협회 규격부터
Mill Maker Standards까지 공급하고 있습니다.

Citius, Altius, Fortius,
더 빠르게, 더 높이, 더 강하게가 요구되는올림픽처럼

공급이 어려운 철강재 공급에는
진정한 전문 선수를 필요로 합니다.

 구매, 문의, 견적, 안내가 필요하신 경우
Contact us 바로가기 : https://steelmax.co.kr/contact/