A710 Grade B, Alloy Structural Steel Plate
STEELMAX Steel Story

 

ASTM A710 Graed B 강재는 합금강 구조용 강판 규격입니다.
석출 경화성 강도 향상 원소 Copper (Cu) 합금과

Columbium (Cb) Titanium (Ti) 합금으로, 강재 조직의
미세화 원소를 합금 해, 강도 향상 시킨 강판입니다.

A710 Grade B 강재에는 강재의 인성을 증가 시켜 저온 인성 성질을
높여주는 Nickel (Ni) 1.25~1.50 합금 강재입니다.

ASTM A710 Graed B (A710 Gr.B) 는 Class 1 — As rolled
Class 2 — Normalized, Class 3 — N + Precipitation Strengthening, 3종류입니다.

ASTM A710 Graed B 에는 Quenching and Tempering 열처리재가 없지만
ASTM A710 Graed A 에는 QT 열처리 강재가 있는 차이가 있습니다.

A710 Gr.B, ASTM Gr.A 모두, 사용 온도 540℃ 이하의 환경에서 사용하며
극히 낮은 탄소량 (JIS S10C 보다도 낮음) 강판으로, CVN Impact 조건이 있습니다.

A710 Gr.B Cl.1, A710 Gr.B Cl.3 — CVN -23℃/47 joule
A710 Gr.B Cl.2 — CVN -45℃/27 joule minimum 조건입니다.

※ Steels for low temperature service (저온용 강재, 低溫用鋼材 : LTS 강재)
Steel products manufactured for the pressure vessels and structures
used at a low temperature which required toughness at a low
temperature and weldability.
There are carbon steel, low alloy steel, 2.5% nickel steel, 3.5 nickel steel
9% nickel steel, austenitic stainless steel, etc. according to use temperature.

저온하에서 쓰이는 용기, 설비 및 구조재로서 저온 인성 및 용접성을 중시해서
제조 된 강재로, 사용 온도에 따라 탄소강, 저합금강, 2.5% 니켈강, 3.5% 니켈강
9% 니켈강, 오스테나이트 스테인레스강이 있습니다.

※ Nickel (Ni)
One of the most widely used alloying elements in steel.
In amounts of 0.50% to 5.00% its use in alloy steels increases
the toughness and tensile strength without detrimental effect
on the ductility. Nickel also increases the hardenability.

니켈은 강 (steel)에 많이 합금 되는 원소로, 0.50~5.00% 수준의 합금으로도, 강의
연성에 해로운 영향을 주지 않고, 강도와 인성을 증가 시키고, 경화능 향상 원소입니다.

 

ASTM A710 Grade B
Chemical composition (%) Carbon (C) 0.03~0.09
Manganese (Mn) 0.45~1.30
Phosphorus (P) 0.025 max
Sulfur (S) 0.025 max
Silicon (Si) 0.30~0.50
Nickel (Ni) 0.80~1.00
Chromium (Cr) 0.30 max
Molybdenum (Mo) 0.25 max
Copper (Cu) 1.25~1.50
Columbium (Cb) 0.02~0.06
Titanium (Ti) 0.01~0.03

 

 

ASTM A710 Grade B
Mechanical Properties Thickness (mm) Gr.B Cl.1 Gr.B Cl.2 Gr.B Cl.3
Yield Strength (MPa, min) 6.5<t≤20 485 485 515
20<t≤50 485 485
Tensile Strength (MPa, min) 6.5<t≤20 550 550 585
20<t≤50 550 550
Elongation (%) 20 20 20

 

 

ASTM

A710 Grade B, Alloy Structural Steel Plate

 

스틸맥스는 연구소 수준의
깊이 있는 철강에 대한 이해를 바탕으로,

Carbon Steel, Special Steel, Stainless, Functional steel,
Ni-Alloy, Cu-Alloy, Al-Alloy, Ti-Alloy, Forging.

Plate, Sections, H-BEAM, Angle, Channel,
Flat, Round Bar, Rail, Pipe & Tube, SMLS,

ASTM, ASME, AISI-AMS, ANSI, API, SAE, AS, CSA
DIN-EN , KS, JIS, DNV, ABS, GL, LR, KR, NK. RINA, RS, CCA, IACS의

국가규격, 국제단체 규격, 국제협회 규격부터
Mill Maker Standards까지 공급하고 있습니다.

Citius, Altius, Fortius,
더 빠르게, 더 높이, 더 강하게가 요구되는올림픽처럼

공급이 어려운 철강재 공급에는
진정한 전문 선수를 필요로 합니다.

 구매, 문의, 견적, 안내가 필요하신 경우
Contact us 바로가기 : https://steelmax.co.kr/contact/