ASTM A203 Grade E. 3.5% Ni-Alloy Plate
STEELMAX Steel Story

 

ASTM A203 Grade E 재질은 Nickel 3.50% 합금,
용접 하는 보일러 압력용기용 강판에 대한 규정입니다.

ASTM A203 Grade E 재질의 특징은 Nickel 합금 강판이라는데 있고
Nickel 원소의 특징은 저온 인성을 높여주는데 있습니다.

​ASTM A203 Grade E 강재처럼 저온 환경에 사용되는 강재인 경우
거의 대부분 Nickel 을 합금하고 있고, 스텐레스 같이 높은

Nickel 합금 오스테나이트 강재인 경우 -196℃ 수준까지 사용합니다.
니켈 합금이 저온 취성 현상을 급격히 개선하는 성질을 이용한 합금강판입니다.

​※ Steels for low temperature service (저온용 강재, 低溫用鋼材 : LTS 강재)
Steel products manufactured for the pressure vessels and structures
used at a low temperature which required toughness at a low
temperature and weldability.
There are carbon steel, low alloy steel, 2.5% nickel steel, 3.5 nickel steel
9% nickel steel, austenitic stainless steel, etc. according to use temperature.

저온하에서 쓰이는 용기, 설비 및 구조재로서 저온 인성 및 용접성을 중시해서
제조 된 강재로, 사용 온도에 따라 탄소강, 저합금강, 2.5% 니켈강, 3.5% 니켈강
9% 니켈강, 오스테나이트 스테인레스강이 있습니다.

※ Nickel (Ni)
One of the most widely used alloying elements in steel.
In amounts of 0.50% to 5.00% its use in alloy steels increases
the toughness and tensile strength without detrimental effect
on the ductility. Nickel also increases the hardenability.

니켈은 강 (steel)에 많이 합금 되는 원소로, 0.50~5.00% 수준의 합금으로도, 강의
연성에 해로운 영향을 주지 않고, 강도와 인성을 증가 시키고, 경화능 향상 원소입니다.

※ Brittleness (취성 : 脆性 : 메짐성)
The property of little deformability, hard and brittle in general,
It is usually compared by the strength of impact or the surface conditions of fracture.

20℃< 0℃< -20℃<-40℃<-60℃<-100℃ 저온으로 가면 갈수록
Brittleness (취성 : 깨지는 성질)는 급격히 증가하며, 구조체의 안전을 확보해야 할
철강 구조체가, 온도가 내려가는 환경에서 버티는 성질이 중요합니다.

 

A203 Gr.E, 3.50% Nickel Alloy
Chemical Composition
(%)
Carbon (C) t≤50 0.20 max
50<t≤100 0.23 max
Manganese (Mn) t≤50 0.78 max
50<t 0.88 max
Phosphorus (P) 0.025 max
Sulfur (S) 0.025 max
Silicon (Si) 0.13~0.45
Nickel (Ni) 3.18~3.82
Proof Stress (N/㎟) t≤50 275 min
50<t 275 min
Tensile Strength (N/㎟) t≤50 485~620
50<t 485~620
CVN, Impact energy (min) t≤50 -101℃/20 joule
50<t≤75 -87℃/20 joule
Elongation (%) t≤50 21 min
50<t 17 min

 

 

ASTM

A203 Grade E. 3.5% Ni-Alloy Plate

 

ASTM

A203 Grade E. 3.5% Nickel Alloy Plate

 

스틸맥스는 연구소 수준의
깊이 있는 철강에 대한 이해를 바탕으로,

Carbon Steel, Special Steel, Stainless, Functional steel,
Ni-Alloy, Cu-Alloy, Al-Alloy, Ti-Alloy, Forging.

Plate, Sections, H-BEAM, Angle, Channel,
Flat, Round Bar, Rail, Pipe & Tube, SMLS,

ASTM, ASME, AISI-AMS, ANSI, API, SAE, AS, CSA
DIN-EN , KS, JIS, DNV, ABS, GL, LR, KR, NK. RINA, RS, CCA, IACS의

국가규격, 국제단체 규격, 국제협회 규격부터
Mill Maker Standards까지 공급하고 있습니다.

Citius, Altius, Fortius,
더 빠르게, 더 높이, 더 강하게가 요구되는올림픽처럼

공급이 어려운 철강재 공급에는
진정한 전문 선수를 필요로 합니다.

 구매, 문의, 견적, 안내가 필요하신 경우
Contact us 바로가기 : https://steelmax.co.kr/contact/