GOST 27772-2015, C255, Structural Steel
STEELMAX Steel Story

 

GOST C255 27772-2015, 재질은 건축용 일반 구조용 압연강재입니다.
C255 는 GOST (Russian: ГОСТ) 규격으로 탄소강재입니다.

GOST C255 화학 원소 규정에 Cr, Ni, Cu, Al, Ti 원소가 표기되어 있지만
합금 원소로 인정할 수 있는 수준 이하로, 단순한 탄소강재 (carbon steel) 입니다.

GOST C255 와 같이 러시아 강재 규격에 나타나는 숫자는
“255” 항복강도 최소 값으로, C255 재질의 최소 인장강도는 380 MPa 입니다.

GOST C255 재질은 Charpy V-Notch 저온 충격 시험 조건이 있고 — KVC
U-Notch — KCU 시험이 각각 있는 탄소강재 규격입니다.

GOST C255 재질이 있는 27772-2015 규정에는 모두 11 가지 재질이 있고
C235, C255, C345, C355, C390, C440, C550 등의 재질이 있습니다.

※ Steel for structure (구조용강 : 構造用鋼)
Steel products manufactured for building, bridges, ships, vehicles,
and other structure uses, which require high strength,
if required weldability as well.

건축, 교량, 선박, 차량, 기타의 구조물용으로서 강도 및 필요에 따라
용접성을 중시하여 제조 된 강재를 말합니다.

※ Rolled steel products (압연강재 : 壓延鋼材)
Steel products to be formed bars, wire rods, sections, steel strip
in coil, steel plates, flat bar and so on by rolling mill.
Normally those further not hot rolled by the manufacturer.

압연기로서 봉강, 선재, 형강, 강판, 강대, 평강 등의 모양으로, 성형 가공한 강재로
성형 가공 후 보통 제조자에 의해 더 이상 추가적인 열간 압연이 없습니다.

※ Steel (강 : 鋼)
Material whose main component is iron and generally about
2% or under of carbon and other compositions are contained
주요 원소가 철로서 2% 이내의 탄소를 포함한 강재.

C255, GOST 27772
Chemical composition (%) Carbon (C) 0.17 max
Manganese (Mn) 1.00 max
Silicon (Si) 0.15~0.30
Sulfur (S) 0.025 max
Phosphorus (P) 0.035 max
Chromium (Cr) 0.30 max
Nickel (Ni) 0.30 max
Copper (Cu) 0.30 max
Aluminum (Al) 0.02~0.05
Titanium (Ti) 0.030 max

 

 

Thickness (mm) Yield strength (MPa) Tensile strength (MPa) Elongation (%) KCV Impact (-20℃/joule)
2.0~3.9 255 min 380 min 20 min 34 min
4.0~10 245 min 380 min 25 min 34 min
10~20 245 min 370 min 25 min 34 min
20~40 235 min 370 min 25 min 34 min

 

 

GOST 27772-2015, C255, Structural Steel

 

스틸맥스는 연구소 수준의
깊이 있는 철강에 대한 이해를 바탕으로,

Carbon Steel, Special Steel, Stainless, Functional steel,
Ni-Alloy, Cu-Alloy, Al-Alloy, Ti-Alloy, Forging.

Plate, Sections, H-BEAM, Angle, Channel,
Flat, Round Bar, Rail, Pipe & Tube, SMLS,

ASTM, ASME, AISI-AMS, ANSI, API, SAE, AS, CSA
DIN-EN , KS, JIS, DNV, ABS, GL, LR, KR, NK. RINA, RS, CCA, IACS의

국가규격, 국제단체 규격, 국제협회 규격부터
Mill Maker Standards까지 공급하고 있습니다.

Citius, Altius, Fortius,
더 빠르게, 더 높이, 더 강하게가 요구되는올림픽처럼

공급이 어려운 철강재 공급에는
진정한 전문 선수를 필요로 합니다.

 구매, 문의, 견적, 안내가 필요하신 경우
Contact us 바로가기 : https://steelmax.co.kr/contact/