AMS 6930, Solution and Aged, Bar, Forging
STEELMAX Metal Story

 

AMS 6930 규정은 6Al-4V 티타늄 합금으로 고용화 열처리와 석출 경화
열처리 된, 환봉과 단조재로 높은 비강도 (strength to weight) 합금입니다.

Ti 6Al-4V STA (Solution Treated and Aged), Ti Gr.5 STA, Ti 6-4 STA 로도
표기하는 6% Aluminum, 4% Vanadium 을 합금한 티타늄 합금입니다.

6Al-4V 재질은 대부분 Annealed 공급으로 120 ksi minimum 수준의 높은
항복강도이고, Aged 열처리시는 이보다도 높은 150 ksi 도 가능한 재질이면서

비중이 4.429 g/㎤ 으로, 비중에서 Nickel Alloy 대비 50% 수준밖에 안됩니다.
이와 같은 무게 대비 강도 (비강도)에서 우수하고 내식성, 좋은 용접성 합금으로

우주 항공용, 의료기기, marine, 화학 공정, 석유 시추 설비와 해상용 부품으로 사용됩니다.
AMS 6930 티타늄 합금은, 중간 수준의 고온 환경인 400℃ 수준까지 사용합니다.

AMS 6930 단조와 환봉 규정 재질 티타늄 합금은, ASTM B348 Grade 5
빌렛과 환봉, ASTM B381 Gr.5 단조재 규정과 비교 가능합니다.

※ Solution Heat Treatment (용체화 처리 : 溶體化處理)
A heat treatment in which the alloy to be heat-treated is heated at a proper
temperature not low than solution limit temperature and made to the state
of super-saturated by rapid cooling after the alloy components have been
sufficiently smelted.

합금을 적절한 온도로 가열하고 급랭한 후 과포화 상태로 존재하던
가용 성분을 고용체에 고용될 수 있도록 충분히 유지하는 공정을 말합니다.

※ Aging treatment (시효처리 : Precipitation Hardening : 석출 경화)
Heat treatment applied to a ferrous product after solution treatment
bring its properties to the required level.
Note : It consists of heating to and socking at one or more
specified temperature, followed by appropriate cooling.

철강재가 필요한 성질을 가지도록 용체화 처리한 뒤에 적용하는 열처리.
이 처리는 가열한 뒤 정해진 하나 또는 두 온도에서 일정 시간 유지하는
균열화 처리 후 적절하게 냉각하는 공정으로 이루어집니다.

 

ASTM B348, R56400, Ti-6Al-4V, Ti-Gr.5
Chemical composition (%) Carbon (O) 0.08 max
Oxygen (C) 020 max
Nitrogen (N) 0.05 max
Hydrogen (H) 0.015 max
Iron (Fe) 0.40 max
Aluminum (Al) 5.5~6.75
Vanadium (V) 3.5~4.5
Other each 0.1 max
Other total 0.4 max
Titanium (Ti) balance
Tensile strength (min) 130 ksi/895 MPa
Yield strength (min) 120 ksi/828 MPa
Elongation (%, min) 10
Reduction of area (%, min) 25

 

 

AMS

AMS 6930, Solution and Aged, Bar, Forging, Titanium Alloy

 

스틸맥스는 연구소 수준의
깊이 있는 철강에 대한 이해를 바탕으로,

Carbon Steel, Special Steel, Stainless, Functional steel,
Ni-Alloy, Cu-Alloy, Al-Alloy, Ti-Alloy, Forging,

Plate, Sections, H-BEAM, Angle, Channel,
Flat, Round Bar, Rail, Pipe & Tube, SMLS,

ASTM, ASME, AISI-AMS, ANSI, API, SAE, AS, CSA
DIN-EN , KS, JIS, DNV, ABS, GL, LR, KR, NK. RINA, RS, CCA, IACS의

국가규격, 국제단체 규격, 국제협회 규격부터
Mill Maker Standards까지 공급하고 있습니다.

Citius, Altius, Fortius,
더 빠르게, 더 높이, 더 강하게가 요구되는올림픽처럼

공급이 어려운 철강재 공급에는
진정한 전문 선수를 필요로 합니다.

 구매, 문의, 견적, 안내가 필요하신 경우
Contact us 바로가기 : https://steelmax.co.kr/contact/