SAE1020 Cold Drawn, A513 Type, Condition
STEELMAX Steel Story

 

SAE1020 재질은 미국 자동차 기술 협회 (Society of Automotive Engineers)의
탄소강 재질로, 탄소량 nominal 0.20% 수준의 강재를 말합니다.

SAE1020 재료는 튜브, Round Bar 형상 제품 등이 있고,
SAE1020 Cold Drawn Tube (냉간 인발 튜브) 제품이면서

DOM (Drawn Over a Mandrel) 공정으로 생산되고
Stress Relieved Annealed (응력 제거 풀림 열처리) 제품인 경우는

튜브의 공급 명칭이 SAE1020 SRA, A513 Type 5 (DOM) 또는 Dual로
표기되어, 제품의 열처리, 냉간/열간, 용접 강관/SMLS 여부를 알 수 있습니다.

A513 규정은 전기 용접 강관 제품에 대한 규정이고 Type 은 DOM 과
같은 제조 방법을, Condition은 열처리 방법을 약호로 나타냅니다.

※ Stress Relieving (old name : stress relief annealing : 응력 제거 어닐링 (풀림)
Every piece of steel has an amount of internal stress caused
by steel production, machining, surface finish, heat treatment
and other processes.
During a heat treatment process the yield strength is reduced
to a lower level. If precision parts or complicated tools with
close tolerances, this deformation could cause problems.
In the case after rough machining and stress relieving is done
with a high degree of machining allowance.
After this process the internal stress is reduced by the parts deforming.
The standard process is slow heating up to 550~650℃, holding for
minimum 2 hours and finishing with a slow cooling in the furnace.

모든 철강재는 생산, 가공, 표면 마무리, 열처리와 기타 공정 진행에서
내부 응력이 어느 정도 쌓일 수 밖에 없고, 이런 내부 응력을 해소 시키려고
적당한 온도로 가열하고 균열화한 후, 적절한 온도로 냉각함으로써
실질적인 조직의 변화 없이 내부 응력을 줄이고자 시행하는 열처리를 말합니다.

 

SAE1020/A513 Grade 1020 DOM-Stress Relieved Tubing
Chemical composition (%) Carbon (C) 0.18~0.23
Manganese (Mn) 0.30~0.60
Phosphorus (P) 0.035 max
Sulfur (S) 0.035 max
Mechanical properties Yield strength (MPa/ksi) 379/55 min
Tensile strength (MPa/ksi) 448/65 min
Elongation (%) 10 min
Hardness (RB) 75 min

 

Type Number Code Letters Description
1a A.W.H.R “as welded” from hot-rolled steel (with mill scale)
1b A.W.P.O “as welded” from hot-rolled pickled and oiled steel (with mill scale removed)
2 A.W.C.R “as welded” from cold-rolled steel
3 S.D.H.R “sink drawn” hot rolled steel
4 S.D.C.R “sink drawn” cold rolled steel
5 DOM Drawn Over a Mandrel
6 S.S.I.D special smooth inside diameter

 

※ Condition (thermal heat treatment)
NA : Not Annealed ; in the as-welded or as drawn condition
SRA : Stress Relieved Annealed (at a temperature below the lower critical temperature)
N : Normalized or Annealed (at a temperature above the upper critical temperature)

 

SAE1020 Cold Drawn, A514 Type

 

스틸맥스는 연구소 수준의
깊이 있는 철강에 대한 이해를 바탕으로,

Carbon Steel, Special Steel, Stainless, Functional steel,
Ni-Alloy, Cu-Alloy, Al-Alloy, Ti-Alloy, Forging.

Plate, Sections, H-BEAM, Angle, Channel,
Flat, Round Bar, Rail, Pipe & Tube, SMLS,

ASTM, ASME, AISI-AMS, ANSI, API, SAE, AS, CSA,
DIN-EN , KS, JIS, DNV, ABS, GL, LR, KR, NK. RINA, RS, CCA, IACS의

국가규격, 국제단체 규격, 국제협회 규격부터
Mill Maker Standards까지 공급하고 있습니다.

Citius, Altius, Fortius,
더 빠르게, 더 높이, 더 강하게가 요구되는올림픽처럼

공급이 어려운 철강재 공급에는
진정한 전문 선수를 필요로 합니다.

 구매, 문의, 견적, 안내가 필요하신 경우
Contact us 바로가기 : https://steelmax.co.kr/contact/