SFVA F12, JIS G 3203, +NT Alloy Steel
STEELMAX Steel Story

 

SFVA F12 재질은 고온인 650℃ 수준까지, 압력용기에 사용되는
Cr-Mo 합금강재이고 합금량 1Cr-1/2Mo 라고 부릅니다.

1% 수준의 크롬 합금은 고온에서 산화를 방지하는 효과가 있고
0.5% 수준의 몰리브덴 합금은 고온 강도와 크리프 강도 향상에 기여합니다.

JIS G 3203 SFVA F12 재질은 KS D 4123 SFVA F12, ASTM A182-12-2
재질과 서로 비교 가능한 고온 압력용기용 단조 합금강 재질입니다.

이 재질 강재는 Normalizing, Normalizing + Tempering
Annealing 열처리를 할 수 있습니다.

※ Molybdenum (Mo)
Its use as an alloying element in steel increase hardenability and
in low alloy steels reduces the risk of temper brittleness.
It is used in stainless steels as well as high speed steels.
It is increases the high-temperature tensile and creep strengths in steel.

몰리브덴은 경화능 향상 원소이고, 저합금강에서는 템퍼 취성을 감소 시키는
역할을 합니다. 몰리브덴은 고속도강부터 스텐레스까지 합금 되는 원소입니다.
몰리브덴은 강에서 고온 강도와 크리프 강도를 높여주는 역할을 합니다.

※ Creep resistance (내 (耐) 크리프성)
a property of resistance against a phenomenon in which
strain in the lapse of time under a fixed stress at a high
temperature called high temperature creep.

고온의 일정한 압력을 받는 환경에서 물질의 변형이
시간이 경과함에 따라 증가하는 현상을 고온 크립이라고 하고
이에 견디는 성질을 말합니다.

 

SFVA F12, JIS G 3203
Chemical composition (%) Carbon (C) 0.20 max
Manganese  (Mn) 0.30~0.80
Silicon (Si) 0.60 max
Phosphorus (P) 0.030 max
Sulfur (S) 0.030 max
Chromium (Cr) 0.80~1.25
Molybdenum (Mo) 0.45~0.65
Mechanical properties Tensile strength (MPa) 480~660
Yield strength (MPa) 275 min
Elongation ( %) 18 min
Reduction of area (%) 35 min

 

 

SFVA F12, JIS G 3203, Forging Alloy for Pressure Vessel

 

스틸맥스는 연구소 수준의
깊이 있는 철강에 대한 이해를 바탕으로,

Carbon Steel, Special Steel, Stainless, Functional steel,
Ni-Alloy, Cu-Alloy, Al-Alloy, Ti-Alloy, Forging.

Plate, Sections, H-BEAM, Angle, Channel,
Flat, Round Bar, Rail, Pipe & Tube, SMLS,

ASTM, ASME, AISI-AMS, ANSI, API, SAE, AS, CSA,
DIN-EN , KS, JIS, DNV, ABS, GL, LR, KR, NK. RINA, RS, CCA, IACS의

국가규격, 국제단체 규격, 국제협회 규격부터
Mill Maker Standards까지 공급하고 있습니다.

Citius, Altius, Fortius,
더 빠르게, 더 높이, 더 강하게가 요구되는올림픽처럼

공급이 어려운 철강재 공급에는
진정한 전문 선수를 필요로 합니다.

 구매, 문의, 견적, 안내가 필요하신 경우
Contact us 바로가기 : https://steelmax.co.kr/contact/