AMS 5887, N06617 Bar Rod Nickel Alloy
STEELMAX Metal Story

 

AMS 5887 규정 재료는 단조재와 링 형상의 제품으로, 내열성과
내식성이 특징인, 니켈 합금으로, 소모전극이나 진공유도용해

방법으로 생산하고 Annealed 열처리 조건의 가스 터빈용 합금입니다.
니켈-크롬-코발트-몰리브덴 합금체로 고온 내산화성 재료입니다.

냉간이나 열간 재료인 경우 기계적 성질이 규정돼 있지만
단조재인 경우는 표면 검사와 화학원소내용만으로 제공됩니다.

AMS 5887 규정은 B166 UNS N06617, EN 2.4673, Inconel® Alloy 617 과
대응되고, 1100℃ 수준까지 침탄 (浸炭)과 내산화성의 극히 우수한 내열 재료입니다.

※ Heat Resistance (내열성 : 耐熱性) — DIN-EN
Property of materials that are used at above 550℃ (for steel : wustite point)
due to their excellent resistance to the effects of hot gases and products of
combustion as well as their resistance to the influence of molten salts and
molten metals but also showing good mechanical properties during short
and long-time stressing.

내열성은 550℃ 를 넘는 연소 가스의 영향에 저항성 성질 뿐 아니라 용융염,
용융 금속에도, 짧은 시간부터 오랜 기간 응력에 대한 영향에서, 좋은 기계적
성질과 내산화 내부식 성질입니다.
대개의 금속은 540~550℃ 수준을 넘는 온도 노출되면 미세 구조의 변화로
심한 연성 저하와 충격 강도의 저하가 있습니다.

※ Vacuum Melting (진공용해 : 眞空熔解)
Melting in a vacuum to prevent contamination from air, as well as to
remove gases already dissolved in the metal ; the solidification may
also be carried out on a vacuum or at low pressure.

진공이나 낮은 압력에서 금속을 용해하는 생산 방법으로 대기 속에
있는 산소, 불순물이 들어가지 않게 금속을 제조하는 방법으로, 의료용,
고급 금속, 특수강, 전자 산업용 금속 재료의 생산에 사용되는 방법입니다.

 

B166 N06617, Alloy 617, Bar, Rod, Wire
Chemical composition (%) Nickel (Ni) 44.5 min.
Chromium (Cr) 20.0~24.0
Cobalt (Co) 10.0~15.0
Molybdenum (Mo) 8.0~10.0
Iron (Fe) 3.0 max.
Manganese (Mn) 1.0 max.
Aluminum (Al) 0.8~1.5
Carbon (C) 0.05~0.15
Copper (Cu) 0.5 max.
Silicon (Si) 1.0 max.
Sulfur (S) 0.015 max.
Titanium (Ti) 0.6 max.
Boron (B) 0.006 max.
Cold/Hot worked Annealed Tensile strength (MPa) 655 min.
Yield strength (MPa) 240 min.
Elongation (%) 35 min.

 

 

AMS 5887, UNS N06617 Bar Rod Ni-alloy

 

스틸맥스는 연구소 수준의
깊이 있는 철강에 대한 이해를 바탕으로,

Carbon Steel, Special Steel, Stainless, Functional steel,
Ni-Alloy, Cu-Alloy, Al-Alloy, Ti-Alloy, Forging.

Plate, Sections, H-BEAM, Angle, Channel,
Flat, Round Bar, Rail, Pipe & Tube, SMLS,

ASTM, ASME, AISI-AMS, ANSI, API, SAE, AS, CSA,
DIN-EN , KS, JIS, DNV, ABS, GL, LR, KR, NK. RINA, RS, CCA, IACS의

국가규격, 국제단체 규격, 국제협회 규격부터
Mill Maker Standards까지 공급하고 있습니다.

Citius, Altius, Fortius,
더 빠르게, 더 높이, 더 강하게가 요구되는올림픽처럼

공급이 어려운 철강재 공급에는
진정한 전문 선수를 필요로 합니다.

 구매, 문의, 견적, 안내가 필요하신 경우
Contact us 바로가기 : https://steelmax.co.kr/contact/