PFC 380 × 100 × 54.0 kg/m, Parallel Flange Channel
STEELMAX Steel Story

 

PFC 프렌지 평형 찬넬 (Parallel Flange Channel) 형강은
영국 규격의 찬넬로 프렌지 형상이 Taper 지지 않고 Parallel 형상입니다.

PFC 380 찬넬의 높이 380 mm , 프렌지의 길이 100mm,
Web 두께 (tw) 9.5t, Flange 두께 (tf) 17.5t, 단위 중량 54.0kg/m 입니다.

평형 찬넬은 PFC 100 ~ PFC 430 까지 모두 16 종류 Size입니다.
PFC 와 같은 형상의 Channel은, KS, JIS 규격으로는 없습니다.

PFC 찬넬은 열간 압연 강재로 제조하며, 재질은 10025-2 규정을 따르고
표면 품질은 EN 10163, 허용 공차는 EN 10279 규정을 따릅니다.

PFC 찬넬의 특징은 CVN — Charpy Impact V-Notch 충격 시험이 있는
강재로 JIS 재질과는 충격 시험 부분에서 차이도 있습니다.

※ Rolled steel products (압연강재)
Steel products to be formed to bars, wires rods, sections,
steel plates, steel strip in coil, flat-bar and so on by rolling mill
Normally those further not hot rolled by the manufacturer
압연기로 봉강, 선재, 형강, 강판, 강대, 평강 등의 모양으로
성형 가공된 강재.

※ Charpy V-Notch Impact Test (CVN : 샤르피 충격 시험)
Test to measure the absorbed energy, impact value, percentage
of brittle/ductile fracture, transition temperature, etc. with using
charpy impact testing machine in which test piece is supported by
two supports distant by 40mm so that the notch meets the middle
between supports and is broken by striking with one blow of
pendulum to the face opposite the notch.

샤르피 충격 시험기를 사용하여 시험편을 40mm 간격이 있는 두 개의
지지대에 올려 놓고, 또한 노치부를 지지대 사이의 중앙에 놓고
노치부의 뒷면을 해머로 1회만 충격을 주어, 시험편을 파단 시키고
흡수 에너지, 충격치, 파면율, 천이 온도 등을 측정하는 시험.

 

S355J0, 1.0553
Chemical Composition
(%)
Carbon (C) t≤16 0.20 max
16<t≤40 0.20 max
40<t 0.22 max
Silicon (Si) 0.55 max
Manganese (Mn) 1.60 max
Phosphorus (P) 0.030 max
Sulfur (S) 0.030 max
Copper (Cu) 0.55 max
Nitrogen (N) 0.012 max
 Proof Stress (N/㎟) t≤16 355 min
 Tensile Strength (N/㎟) t≤3 510~680
3<t≤100 470~630
CVN -20℃
O℃ 27
20℃
Method of Deoxidation FN

 

 

DIN-EN

PFC 380 × 100 × 54.0 kg/m, Parallel Flange Channel, S355J0

 

스틸맥스는 연구소 수준의
깊이 있는 철강에 대한 이해를 바탕으로,

Carbon Steel, Special Steel, Stainless, Functional,
Ni-Alloy, Cu-, Al-, Co-, Ti-, Mg-, Metal, Forging.

Plate, Sections, H-Beam, Round, Angle, Channel,
Rail, Crane Rail, Flat, I-Beam, Pipe & Tube, SMLS.

ASTM, ASME, AISI, API, SAE, AMS, KS, JIS, CSA,
DIN-EN, NORSOK, DNV, ABS, GL, LR, KR, NK, RS.

국가규격, 국제단체 규격, 국제협회 규격부터
Mill Maker Standards까지 공급하고 있습니다.

Citius, Altius, Fortius,
더 빠르게, 더 높이, 더 강하게가 요구되는 올림픽처럼

공급이 어려운 철강재 공급에는
진정한 전문 선수를 필요로 합니다.