B209-5083 Temper O, Sheet, Al-Alloy
STEELMAX Metal Story

 

ASTM B209-5083 Aluminum 합금은 비열처리 합금으로
냉간 압연의 가공 경화로 강도를 높여 사용하는 재질입니다.

Al-Magnesium 합금으로, 5000 series 합금은 마그네슘을
6% 수준까지 합금 하며 (example 5059 Alloy), ASTM B209-5083 재료는

5000 series 합금 중 최고 수준의 기계적 성질이고, 내식성, 용접성 금속입니다.
B209-5083 합금은, 저온용 탱크, 압력 용기, 선박, 차량용 재료로 쓰입니다.

※ Temper
The term “temper” means the division of mechanical properties
individually formed by various processing and heat treatment
conditions in the manufacturing process.
금속 또는 합금에 요구되는 특정한 물리적 성질 또는 기계적 성질을
부여하는 공정(예를 들면 기계적 처리 및 열처리) 후의 상태를 말합니다.

※ Temper O
Annealed, Recrystallized — Applies to the softest temper of wrought products.
어닐링 (풀림 열처리)한 것으로 전신재에 대해 가장 부드러운 상태를 얻은 상태입니다.

※ Wrought product (전신재 : 展伸材 : 가공용 합금)
A general term for products obtained by hot and/or cold plastic deformation
processes such as extruding, forging, hot rolling, cold rolling or drawing, either
exclusively or in combination.
Examples for wrought products are rod/bar, wire, tube, profile, sheet, strip, forging.

단독 또는 복합적인 압출, 단조, 열간 압연, 냉간 압연 또는 인발과 같은 열간 및 또는
냉간 소성 변형에 의해 얻어지는 제품에 대한 일반적인 용어로, 전신 제품의 예로는
봉, 바, 선, 관, 형재, 판, 조, 단조물이 있습니다.

 

B209 Alloy 5083
Chemical composition (%) Silicon (Si) 0.40 max
Iron (Fe) 0.40 max
Copper (Cu) 0.10 max
Manganese (Mn) 0.40~1.0
Magnesium (Mg) 4.0~4.9
Chromium (Cr) 0.05~0.25
Zinc (Zn) 0.25 max
Titanium (Ti) 0.15 max
Other each 0.05 max
Other total 0.15 max
Aluminum (Al) remainder

 

 

Alloy 5083, Temper O
Thickness (mm) Tensile strength (MPa) Yield Strength (MPa) El.(%)
1.20<t≤40.00 275~350 125~200 14 min
40.00<t≤80.00 270~345 115~200 14 min
80.00<t≤100.00 260 min 110 min 14 min
100.00<t≤120.00 260 min 110 min 12 min
120.00<t≤180.00 255 min 105 min 12 min
180.00<t≤200.00 250 min 95 min 10 min

 

 

ASTM

B209-5083 Temper O, Sheet, Aluminum-Alloy

 

스틸맥스는 연구소 수준의
깊이 있는 철강에 대한 이해를 바탕으로,

Carbon Steel, Special Steel, Stainless, Functional steel,
Ni-Alloy, Cu-Alloy, Al-Alloy, Ti-Alloy, Forging.

Plate, Sections, H-BEAM, Angle, Channel,
Flat, Round Bar, Rail, Pipe & Tube, SMLS,

ASTM, ASME, AISI-AMS, ANSI, API, SAE, AS, CSA
DIN-EN , KS, JIS, DNV, ABS, GL, LR, KR, NK. RINA, RS, CCA, IACS의

국가규격, 국제단체 규격, 국제협회 규격부터
Mill Maker Standards까지 공급하고 있습니다.

Citius, Altius, Fortius,
더 빠르게, 더 높이, 더 강하게가 요구되는올림픽처럼

공급이 어려운 철강재 공급에는
진정한 전문 선수를 필요로 합니다.

 구매, 문의, 견적, 안내가 필요하신 경우
Contact us 바로가기 : https://steelmax.co.kr/contact/